Finishing putty: the subtleties of Choice and use

putty

Finishing putty can itself function as last decorative end.

Its direct purpose is:

  • Improving the quality of their working surface after the previous rougher treatment and preparing it to further completing;
  • Giving the face a decorative look, uniform coloration.
  • “Knauf-Multifinish paste” ready-made polymer filler 20kg

    KNAUF-Multi-finish glue is a readymade filler mixture according to polymer dispersion with vitamin limestone additives and additives that govern the properties of the mixture.

    It is used inside for:

    • Puttying the joints involving KNAUF-sheets with a bulbous edge (UC) and a straight cut edge, together with reinforcing tape;
    • Finishing puttying the surface and joints of KNAUF-sheets, inserted with the mixture KNAUF-Fugenfuller or KNAUF-Uniflot, from the preparation of this surface for high-quality painting;

    Properties

    • Doesn’t need blending and aging;
    • Has a flexible consistency;
    • fills the joints well;
    • dries fast;
    • can be easily coated;
    • has a great adhesion to the substrate;
    • includes a high amount of whiteness following drying.

    Material consumption

    Consumption of https://gidpostroy.ru/ this filler mix is:

    • After sealing the joints of KNAUF-sheets using a thin border of this AC ~ 0.30-0.35 kg/m2
    • at complete puttying of the surface with 1 Millimeter coating depth ~ 1.7 kg/m2

    Procedure of works

    The warmth of the foundation along with the space air must be 10°C.

    KNAUF-boards must be firmly constructed on the load-bearing frame, be dry, warm and dust-free. Puttying the joints of KNAUF-boards need to be made at the operational temperatures and humidity requirements, following all work related to its changes, which simulates linear deformations of all gypsum board sheets.

    Large irregularities or damages must be levelled with KNAUF-Fugenfüller dried and compound.

    Leave a Reply

    Your email address will not be published. Required fields are marked *