How to Pick out a screwdriver for Your home?


This versatile instrument helps not just to screw , but also to unscrew screws and screws, which are often”stuck” and do not give themselves to the normal”manual” screwdriver. Costs screwdriver for the house more costly than a regular screwdriver, but justifies itself significant savings in effort and time. Furthermore, some versions of screwdrivers enable you to drill holes in different materials. Kinds of screwdrivers

Tools of this type can be divided into two Major kinds:

  • For professional purposes;
  • For domestic purposes.

Professional versions are selected for regular use. They’ve a high rotation rate – up on 1300 rpm, and higher torque – up to 130 Nm. This permits you to develop considerable drive , and drill holes from wooden parts as well as brick walls.

Domestic models are selected for occasional usage. The speed of rotation is significantly less – up to 500 revolutions per second, the torque does not exceed 15 Nm. This is quite enough to twist a screw or unscrew it, disassemble a lock, make furniture assembly. For national function is very enough those chances that provide family screwdrivers. Furthermore, the cost of screwdrivers for house use is much less than professional screwdrivers.

What to pick a screwdriver for your house or cordless?

Screwdrivers are divided into two main groups:

  • Mains;
  • Cordless.

A mains screwdriver for the homeThese and the other have their flaws and strengths. Network models are very strong, they can work for a long time, without fearing at the main time this tool will suddenly turn off. It won’t need to be put on recharge, and this is particularly important if you have to use the screwdriver for quite a while. Also, you won’t run into a situation where you need the tool urgently – and you cannot use it since the battery is empty.

The most important disadvantage of mains screwdrivers to get dwelling – the cable with which you are”attached” to the socket. It will not work where there’s no power, and the front of the work should be as near as possible to this outlet. In addition, it’s not always convenient to work when a long cord comes from the tool.

Leave a Reply

Your email address will not be published. Required fields are marked *