Plaster Net: pros and cons


Modern repairs do not do without using plaster, because the walls, floor and ceiling in the finished shape ought to be perfectly even, be heat and sound insulated, function long and reliably. If you do not employ a layer of plaster on the wall, you will not get the wanted effect. For the plaster layer to hold reliably, to not crack and not to fall, it is necessary to strengthen it. Such a fixing mechanism would be the mesh.

If formerly used more crude and inconvenient substances to fortify the surface under plaster, with the arrival of net made of new materials to operate has become a great deal more convenient and quicker. Plastering mesh could be made from different materials, have different cell dimensions, shape and weight of the net. All this causes distinct results from its use.

Virtually every construction store now includes a choice of net below the plaster, that have various lengths, making it possible to choose the optimal amount of material required for the work. The theory of working with it is quite simple, which makes its use more popular for the repair of all chambers in the house, flat, office, obtaining excellent final outcomes.

Plastering mesh is an extremely important component for the repair job, since with its usage, the concluding of these walls is laid easier, and the result is considerably longer. After plastering using the mesh the wall will not change its properties, and so the background won’t be jeopardized by rips at the joints or around the fabric itself. Painted walls are susceptible to the blemishes that look on them, thus by selecting this system, it is crucial to take care of the trustworthiness of the wall and its durability.

Any sort of cladding will be more confidently connected to the surface, and this can be properly handled, and its service life will increase a few times, when the surface has been fortified and protected by all kinds of influences and disagreeable environmental aspects.What to pick?

If we believe the metal type of grids, then there are their own standards by which to choose one or the other choice. These comprise:

  • The excellent features of the raw material, that can be required for the production of the pole or wire. It is desirable to have information concerning the alloy quality of the steel where the net is created, which will reveal how high quality that the product is.
  • The price of steel will likely be higher at small traders, so for big batches must apply to the businesses that take action. Substantial turnover of the product gives an opportunity to recoup it, and for that reason do not exhibit too high of a price.
  • The grade of the rods themselves, the existence of galvanized coat. Non-galvanized mesh may be used for inside works, if it’s used for outside rather than coated with a unique chemical, it will soon corrode and traces of rust can get to the outer coating of finish.
  • It is imperative to pick the best kind of grid. When it’s welded, it is going to hold plaster greater than twisted. This can be important when working with a brick wall or muddy concrete beyond the house, where the plaster layer can reach appreciable size.
  • The sticks need to have a clearly rationed thickness of the rods, so when deciding on a net, you ought to focus on the GOST norms in each package.

Vinyl version of the grid for plaster isn’t inferior to any one of the above possibilities, it can be used on any surface, indoors or out, for your plinth and facade. The only case where it’s worth turning all of the same into the grid of steel, will be the existence of a thick layer of plaster, and that includes a lot of fat, in the other situations, contemporary grids will be much more convenient to work.

Employing a plastic variant involves the choice of the perfect size net, which is often reduced to worth 6 mm, however, you may select another option, depending on the requirements and convenience in the job.

Leave a Reply

Your email address will not be published. Required fields are marked *